About DCL Solutions

Wood Floor Care
As with all Vanguard products, the Wood Floor Care line features handsome, color-coded packaging.

WF-5 Solventless Cleaner 6x1 gallon case, 5-gallon pail A ready-to-use product that quickly removes black marks and soil from sealed wood floors prior to recoating with WF~25 Water-Based Urethane Finish or WF~50 Oil-Modified Urethane Finish for a complete, V.O.C. compliant system. WF~5 is non-flammable, biodegradable and phosphate free. Its thorough cleaning action increases the adhesion properties of the seal thus preparing it for recoating. Pleasantly scented and requires no special disposal methods. Recommended for use on all sealed gymnasium, racquetball courts and other similar wood floors. Type Of Product: Water-based Floor Cleaner Percent Solids: 6.0 ± 0.5 Weight Per Gallon: 8.45 lbs Appearance: Clear Yellow pH: 8.0-9.0 V.O.C. Rating: Less Than 100 Grams Per Liter Coverage: 500 Square Feet Per Gallon Odor: Lemon	WF-100 Dust-Mop Treatment 6x1 gallon case, 5-gallon pail A non-flammable, water-soluble dustmop treatment that is specially formulated to be used on high-gloss and wood floor finishes. Quickly lifts dust from all surfaces. WF~100 does not contain any oils so it will not leave a slippery residue or dull the shine of finishes. Type Of Product: Glycol Base Treatment Percent Solids: 4.0 ± 0.5 Weight Per Gallon: 8.49 lbs Appearance: Water White pH: 6.0-7.0 Odor: Bananas

WF-10 Waterless Wood Floor Cleaner 2-gallon pail, 5-gallon pail For use on wood floors that have been coated with solvent-based sealers or finishes. When used for routine floor maintenance, it removes wax, food stains and rubber burns without leaving a greasy film or residue. Also excellent for preparing gymnasiums, racquetball courts and similar wood floors prior to coating with solvent-based sealers or finishes. Type Of Product: Waterless Wood Floor Cleaner Percent Active: 100 Weight Per Gallon: 6.6 lbs Appearance: Water White Coverage: 500-600 Square Feet Per Gallon Flash Point: Over 100°F Odor: None	WF-50 Oil-Modified Urethane Finish V.O.C. Compliant 2-gallon pail, 5-gallon pail. Also available in satin. Approved by Maple Flooring Manufacturers Association. A high solids, oil-modified urethane formulation that meets V.O.C. requirements. Its light color brings out the natural grain and color of the wood while its tough, abrasive-resistant urethane polymers resist rubber marks, burns and dirt pick-up. WF~50 provides high gloss and excellent durability. Type Of Product: Oil Modified Urethane Percent Solids: 50.0 Weight Per Gallon: 7.45 lbs Appearance: Clear Light Amber V.O.C. Rating: Less Than 450 Grams Per Liter Coverage: 400-500 Square Feet Per Gallon Flash Point: Over 100°F Recoat Time: Allow To Cure Overnight Light Traffic: Allow To Cure Overnight Heavy Traffic: Allow To Cure 48 To 72 Hours Slip Resistance: Exceeds UL and CSMA Standards (ASTM D-2047) of 0.5 minimum

WF-80 Rinse-Free Neutral Floor Cleaner 6x1 gallon case, 5-gallon pail A synthetic neutral cleaner concentrate formulated specifically for damp mopping and maintaining metal interlock floor finishes, waterborne urethane and oil-modified wood finishes. WF~80 thoroughly wets, emulsifies and suspends soil and residue caused by spills such as coffee, soft drinks, etc. without dulling the gloss of the finish. Excellent for use in automatic scrubbers. No rinsing required. Type Of Product: Hard Surface Cleaner Percent Solids: 3.0 ± 0.5 Weight Per Gallon: 8.29 lbs Appearance: Clear Yellow pH: 6.8-7.5 Odor: Citrus	WF-25 Waterborne Urethane Finish V.O.C. Compliant 4x1 gallon case, 2x2 1/2 gallon case Also available in satin. Approved by Maple Flooring Manufacturers Association. A pre-catalyzed, water-based, urethane finish that is durable, non-yellowing and low odor. This product is non-flammable and meets V.O.C. requirements. An excellent finish for gymnasiums, racquetball courts, and other hard wood floors. May also be applied over solvent-based sealers. Type Of Product: Waterborne Urethane Percent Solids: 28.0-30.0 Weight Per Gallon: 8.80 lbs Appearance: Translucent pH: 8.0-8.5 V.O.C. Rating: Less Than 300 Grams Per Liter Coverage: 600-800 Square Feet Per Gallon Recoat Time: 2-4 Hours Light Traffic: Allow To Cure Overnight Heavy Traffic: Allow To Cure 48 To 72 Hours Slip Resistance: Exceeds UL and CSMA Standards (ASTM D-2047) of 0.5 minimum

Labor Saver Applicator
The Labor Saver Applicator shown with available accessories.
The Vanguard Labor Saver is a multi-purpose applicator that can be used for conventional finishes and both oil-modified and waterborne urethane finishes. The applicator includes: 2 Lambswool Pads • 2 Turan Pads • 1 64-oz Funnel with Filter Screen The fold-down stand and funnel make it easy to fill the reservoir tank with no mess. The PVC-base frame and applicator pads are equipped with Velcro strips for fast, simple assembly and disassembly. The Turan pad can be attached to the applicator when "tacking" the floor or dustmopping. The Vanguard Labor Saver is uniquely designed for use with the 24-inch lightweight bar and Nylfoam pad. It enables dispensing of product from reservoir tank through the manifold system, eliminating the need for a second person with a sprinkling can.

Labor Saver Accessories WF-300 Vanguard Labor Saver Applicator Includes 2 Lambswool Pads, 2 Turan Pads, 64-oz Funnel with Filter Screen WF-305 Lambswool Pads 6/Case For Waterborne Urethane and Oil-Modified Finishes WF-310 Turan Pads 6/Case For "tacking" surface, dust mopping, applying water-base finish WF-320 24-Inch Lightweight Applicator Bar For use with extension bar. Pads sold separately WF-325 24-Inch Nylfoam Applicator Bar Pad For use with either the Vanguard Labor Saver or Lightweight Applicator bar. WF-330 20-Inch 100-Grit Sand Screen 10/Case For screening the floor prior to recoating. WF-335 64-Oz Funnel with Built-In Filter Screen 6/Case For use when filling reservoir tank of Vanguard Labor Saver Applicator with finish or sealer.

e-mail: sales@dclsolutions.com