THE ONE & DONE SYSTEM
Innovative floor care products for use with PAK-ITS
These products are conventional formulations, not water-soluble liquid packets
**Click on product's name to download or print helpful information
F600 Extreme Stripper
Two Year Cycle Reliquifier
A new product formulated to quickly penetrate and dissolve the most difficult-to-remove floor finishes hardened by high-speed burnishing and urethane fortification. Dramatically reduces the amount of time and labor expended with the use of conventional floor strippers. Biodegradable and non-corrosive.
F620 Ultra-Mil
38% Ultra-High-Build Metal-Interlocked Sealer/Finish
A superior floor finish and sealer for heavy traffic areas. This floor finish and sealer has an extremely high gloss, unequalled black heel mark and detergent resistance, extended-wear properties beyond all other floor finishes and is easily maintained by damp mopping. Although it was designed to be maintained without buffing, it responds beautifully to spray buffing and high speed burnishing.
F650 Diamond Hard
High-Build Urethane-Laced Metal-interlocked Sealer/Finish
A high-build, metal-interlocked acrylic floor finish laced with clear urethane. Provides unmatched durability and gloss and anti-slip characteristics. Produces a wet-look shine that resists detergents, water, scuffing, black-heel marks and powdering. Excellent for
vinyl tile, terrazzo and quarry tile. Responds to all high-speed floor maintenance procedures.
F700 Emerald Hard
Urethane-Laced Metal-interlocked Sealer/Finish
A metal-interlocked acrylic floor finish laced with clear urethane. Provides unmatched durability and gloss and anti-slip characteristics. Produces a wet-look shine that resists detergents, water, scuffing, black-heel marks and powdering. Excellent for
vinyl tile, terrazzo and quarry tile. Responds to all high-speed floor maintenance procedures.
F750 Restorer/Spray Buff
Super-Concentrated • Urethane-Laced
This new, total-maintenance, urethane-laced formula provides a mirror-like image on all floors coated with metal interlock, thermal plastic or polymer floor finishes. Excellent for use with high-speed machines as a mop-on restorer or rejuvenator or with conventional floor machines as a spray buff. QP71 Rebound
Cleaning & Polishing Compound
A revolutionary new floor-maintenance product designed to clean and polish floors in one labor-saving step. Simply dry-sweep the floor, apply a
3 to 4 inch stream of product and immediately high-speed burnish to a clean, bright gloss. Extends the life of floor finish which lengthens the interval where recoating or stripping becomes necessary. |